51.2 V series

Storage packs from 5 kWh to 50 kWh

Same 16S platform, three form factors: wall-mounted for
a garage, mobile cabinet for a project site, 19-inch rack for a cabinet bank. All of them speak
CAN, RS232 and RS485, so they talk to the inverter you already sell.

51.2 V LiFePO4 pack with the cover removed, showing matched prismatic cells, busbars and BMS — 16S1P assembly, EVE 314 Ah cells, cover removed

32 kWh 51.2 V 628 Ah LiFePO4 mobile cabinet — 32 kWh mobile cabinet, 51.2 V 628 Ah

JN48V-WM

Wall-mounted

100 Ah to 314 Ah. The 5 kWh unit hangs on a bracket; the larger ones land on a floor stand
with the same cabinet design.

Wall-mounted, 51.2 V nominal / 58.4 V charge / 42 V cut-off
Energy	Capacity	Configuration	Cont. discharge	Dimensions	Net weight
5.12 kWh	100 Ah	16S1P	100 A	435 × 160 × 700 mm	44.5 kg
10.24 kWh	200 Ah	16S1P	200 A	472 × 245 × 675 mm	125 kg
11.78 kWh	230 Ah	16S1P	200 A	472 × 245 × 675 mm	127 kg
15.36 kWh	300 Ah	16S1P	200 A	255 × 472 × 870 mm	87.5 kg
16.08 kWh	314 Ah	16S1P	200 A	255 × 472 × 870 mm	88.2 kg

JN48V-MC

Mobile cabinet

300 Ah to 1000 Ah on castors — for site power, workshops and commercial rooms where the
battery has to move or be replaced without an electrician.

Mobile cabinet, 51.2 V / 16S1P–16S3P
Energy	Capacity	Configuration	Cont. discharge	Dimensions	Net weight
15.36 kWh	300 Ah	16S1P	200 A	690 × 300 × 870 mm	125 kg
16.08 kWh	314 Ah	16S1P	200 A	690 × 300 × 870 mm	127 kg
17.92 kWh	350 Ah	16S1P	200 A	690 × 300 × 870 mm	127 kg
20.48 kWh	400 Ah	16S2P	200 A	795 × 300 × 870 mm	180 kg
23.55 kWh	460 Ah	16S2P	200 A	795 × 300 × 870 mm	182 kg
30.72 kWh	600 Ah	16S2P	300 A	830 × 440 × 940 mm	235 kg
32.15 kWh	628 Ah	16S2P	300 A	830 × 440 × 940 mm	237 kg
46.08 kWh	900 Ah	16S3P	300 A	1110 × 440 × 940 mm	362 kg
50.69 kWh	1000 Ah	16S3P	300 A	1110 × 440 × 940 mm	364 kg

JN48V-RT

19-inch rack packs

For telecom-style cabinets and server-room installations. Natural or forced cooling
depending on the model.

Rack-mounted, 51.2 V / 58.4 V charge / 42 V cut-off
Energy	Capacity	Configuration	Cont. discharge	Dimensions	Net weight
5.12 kWh	100 Ah	16S1P	100 A	455 × 480 × 160 mm	43.2 kg
10.24 kWh	200 Ah	16S1P	200 A	580 × 440 × 240 mm	82.6 kg
11.78 kWh	230 Ah	16S1P	200 A	580 × 440 × 240 mm	82.6 kg
15.36 kWh	300 Ah	16S2P	200 A	755 × 440 × 235 mm	125 kg
16.08 kWh	314 Ah	16S2P	200 A	755 × 440 × 235 mm	125 kg

JN48V All-in-One

Battery + inverter in one cabinet

6.2 kW or 11 kW pure-sine inverter, MPPT solar input, 15–31 kWh of storage. One unit to
install and one to service.

All-in-one, 51.2 V nominal
Energy	Capacity	Inverter	Dimensions
15.36 kWh	300 Ah	11 kW	480 × 480 × 640 mm
20.48 kWh	400 Ah	11 kW	480 × 605 × 720 mm
23.55 kWh	460 Ah	11 kW	480 × 605 × 720 mm
30.72 kWh	600 Ah	11 kW	480 × 750 × 720 mm

MPPT input 60–150 V DC, max PV array 6.4 kW, transfer time ≤10 ms (UPS mode),
pure sine wave output 220 V AC 50/60 Hz.

Applicable across the series

Common specifications

Confirm the exact configuration on the datasheet for the model you order.

Parameter	Value
Cell chemistry	LiFePO4 (LFP) prismatic
Nominal voltage	51.2 V (16S) — 12.8 V / 25.6 V / 64 V / 76.8 V in other series
Charge voltage	58.4 V (51.2 V series)
Discharge cut-off	42 V (51.2 V series)
Continuous discharge	100 A – 300 A depending on model
Communication	CAN / RS232 / RS485, Bluetooth optional
Display	LCD or touch screen, depending on model
Cooling	Natural or forced air, depending on model
Protection	Over-current, over/under voltage, over-charge, over-discharge, short circuit
Transport	UN38.3 and MSDS reports with every shipment; sea and air documents on request
Terminals	Ring terminal
Operating temperature	Charge 0 … +60 °C / Discharge −20 … +60 °C